10
ORIGINAL INSTRUCTIONS
28. Only use cables, plugs, and extension cables that comply with the regulations
(H07RN-F cable and European plug 16A/250V).
29. Immediately disconnect the plug from the mains if the cable is damaged or cut, and
get in touch with an authorized Service center for cable repair or replacement.
30. Check the position of the cable and of the extension cables while working, making
sure that they stay outside the range of operation of the chain. Do NOT cut in the
vicinity of other electrical cables.
31. Before assembling the cutting unit (bar and chain), make sure that the electrical
plug is disconnected from the mains.
32. ALWAYS disconnect the plug from the mains before carrying out any
maintenance / cleaning / lubrication operation.
33. Always carefully follow the maintenance instructions provided.
34. Make daily checks to ensure that there are no worn and/or damaged parts and that
the seals are assembled correctly before use. If necessary, get in touch with an
authorized Service center.
35. Do not use gasoline or inflammable solvents as detergents, but always use non-
flammable and non-toxic solvents.
36. After each maintenance or adjustment ensure that no tools or foreign objects
remain among the blades and the moving parts, in order to avoid damage to the
electric saw and/or injury to users.
37. For any maintenance interventions that require the hay-cutter to be disassembled,
get in touch with an authorized service center.
38. When not in use, store your electric saw in a dry place, raised off the ground, and
with the chain-cover on.
Dangers related to the use
Workers responsible for use of the electric chain saws E21 – E23 must have all
necessary information and education and must receive appropriate training
about safety with reference to:
a) the conditions of use of the equipment;
b) foreseeable abnormal situations pursuant to art. 73 Lgs. Decree 81/08.
To Next Page
Loading...
