32
ORIGINAL INSTRUCTIONS
1. Keep the handles of the electric saw firmly, the front one with the left hand while
the rear one with the right hand.
Push the safety block switch (A) and then the Start/Stop button (B) to power up the
electric saw (see Fig. 12).
Figure 12 – Push the safety block switch (A) and then the Start button (B).
Safety rules while cutting
Use the electric saw with both hands, with a firm grip (the right hand on the
rear handle while the left one on the front handle).
Do not keep the electric saw with bar and chain towards yourselves or other
persons.
Do not keep the electric chain saw above the height of your shoulders.
Do not power up the electric saw if the chain is in contact with the material.
Do not use the electric saw if there are other people or animals.
Do not use the electric saw while standing in a seemingly precarious balance
or in an unstable and insecure position.
2. Release the button (B) to stop the engine.
To Next Page
Loading...
