EasyManua.ls Logo

Comet FDX Xtreme Series - Specifications and Technical Data

Comet FDX Xtreme Series
160 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
SPECIFICATIONS AND TECHNICAL DATA
CAUTION
For the engine to reach its maximum power it needs at least 10 hours running-in at a load 15 to 20%
lower than the machines maximum performance.
The engines maximum power diminishes as the altitude and ambient temperature at which it is
working increases (there is a drop of about: 3.5% every 305 m/1000 ft above sea level and 1% every
5.6°C/42°F above 16°C/61°F). If the high pressure water cleaner is used at a high altitude or with high
ambient temperature please refer to the engine’s operating and maintenance manual to see if any
precautions need to be taken.
The declared performance refers to an atmospheric pressure of 1013 hPa at sea level and an ambient
temperature of 16°C/61°F.
If the high pressure cleaner is not connected to the water mains but takes water from a tank, in certain
conditions the thermostat valve can open and prevent the complete self-priming of the pump. In
these cases, t a rubber hose into the hose connection of the thermostatic valve and bring the other
end of the hose to the tank from where the pump takes the water.
The specications and technical data are approximate. The manufacturer reserves the right to make
all changes to the machine it deems appropriate.
FDXXtreme
(1)
18/350 21/500 15/500 18/400 21/350 30/280 36/230 42/180
MOTORISATION
BS 18hp BS 31hp Honda GX 690
Fuel
Petrol
Power
(kW - HP)
15,0 - 18,0 23,0 - 31,0 16,4 - 22,0
Nominal rotation speed - maximum
(RPM)
3400 – 3600 [1560 – 1650
(*)
]
HYDRAULIC CIRCUIT
Maximum supply water temperature
(°C - °F)
60 – 140
Minimum supply water temperature
(°C - °F)
5 – 41
Minimum supply water ow rate
(l/min - USgpm)
23 - 6,1 27 - 7,1 20 - 5,3 23 – 6,1 27 – 7,1 39 – 10,3 47 – 12,4 55 – 14,5
Maximum supply water pressure
(bar - psi)
8 – 116
Maximum priming depth
(m - ft)
0 – 0 1,0 – 3,3
PERFORMANCE
Maximum ow rate
(l/min - USgpm)
18 - 4,8 21 - 5,5 16,5 – 4,4 18 – 4,8 21 – 5,5 30 – 7,9 36 – 9,5 42 – 11,1
Nominal ow rate
(l/min - USgpm)
17,5 - 4,7 20,5 - 5,4 15 – 4,0 17,5 – 4,7 20,5 – 5,4 29,5 – 7,8 35,5 – 9,4 41 – 10,8
Maximum pressure
(bar - psi)
360 - 5220 520 - 7540 520 – 7540 415 – 6020 360 – 5220 280 – 4060
230 – 3335
180 – 2610
Nominal pressure
(bar - psi)
350 - 5075 500 - 7250 500 – 7250 400 – 5800 350 – 5075 270 – 3915 220 – 3190 170 – 2470
Maximum reaction force on the spray gun
(N)
79 110 78 83 91 115 124 127
Sound pressure level - Uncertainty
(dB(A))
89 – 0,7
(2)
89 – 0,7
(3)
89 – 0,7
(2)
Sound power level
(dB(A))
107
(2)
107
(3)
107
(2)
Operator hand-arm vibration - Uncertainty
(m/s
2
)
3,9 – 0,24
(2)
3,9 – 0,24
(3)
3,9 – 0,24
(2)
PUMP OIL
MULTITECH
THT
(4)
15W–40
(4)
ENI MULTITECH THT
(4)
GEARBOX OIL
80W–90
(4)
WEIGHT AND DIMENSIONS
Length x width x height (mm - in)
(mm - in)
1000 x 820 x 850 – 39,4 x 32,3 x 33,5
Weight
(kg - lb)
145 - 319,7 155 - 341,7 150 - 330,7
EN
WARNING
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION
MANUAL  SAFETY WARNINGS.
EN

Table of Contents

Related product manuals