Comet SCOUT 150 User Manual

28
29
• Warning plate (29): informs about a burning danger that is due to the contact with hot parts that
are to be found near the plate itself.
• Warning plate (15): informs about the sound pressure value that is guaranteed by the water
cleaner.
« CAUTION
• After removing the appliance from the packing materials, check that the identication label
and the warning labels are present and are legible. If this is not the case, contact your dealer
or an authorised service centre so they can be replaced.
• If the identication label and the warning labels deteriorate during use, contact your dealer
or an authorised service centre so they can be replaced.
3.2 STANDARD ACCESSORIES
Make sure that in the product package that was bought there are the following elements:
• SCOUT high-pressure water cleaner;
• high-pressure delivery pipe with fast coupling (only CLASSIC);
• hose reel complete with high-pressure delivery pipe (only EXTRA);
• water gun;
• lance hose;
• accessory bag containing:
- nozzle
- nozzle cleaning pin,
- water suction connector
- water suction lter/gasket;
- use and maintenance manual;
- guarantee certicate.
In case of problems, apply to the dealer or to an authorised service centre.
3.3 OPTIONAL ACCESSORIES
« CAUTION
• The operation of the water cleaner may be impaired if unsuitable accessories are used and they
may even make it dangerous. Only use original accessories endorsed by the Manufacturer.
Refer to the documents provided with the optional accessories for information regarding their
general use, safety warnings, installation and maintenance.
• Some accessories have a maximum operating temperature that is lower that the maximum one
that can be reached by the water cleaner: with these accessories it is therefore necessary to
limit the temperature, by operating on knob (27) in the due way.
It is possible to build in the standard equipment of the water cleaner with a rich range of
accessories.
To buy them, apply to the dealer or to an authorised service centre.
3.3.1 Optional accessories with max. operating temperature lower than 90 °C/194 °F
• Pipe draining probe: maximum operating temperature 60 °C/140 °F.
• Rotating nozzle lance hose: maximum operating temperature 60 °C/140 °F (there is also a
professional version with maximum operating temperature of 100 °C/212 °F).
• Floor-washing lance: maximum operating temperature 60 °C/140 °F.
• Rotating water jet brush: maximum operating temperature 60 °C/140 °F.

Comet SCOUT 150 Specifications

General

Brand	Comet
Model	SCOUT 150
Category	Pressure Washer
Language	English