7
I. DETAILED INSTRUCTION MANUAL
UNFOLDING THE STROLLER:
1. Stand in front of the stroller by the footrest.
2. Cut the plastic strap that secures the stroller during transport.
3. Unveil the barrier cover on both sides, press the metal balls at the same time, attracting the
barrier to yourself – disassemble it.
4. Grab the handle of the stroller (1) and lift it up to the resistance.
5. Standing on the side of the stroller, on its right side, at its right hand, lower down
the buckle (9) protecting the stroller from folding, then lift up the handle
(on both sides) two metal rings (8) and lower them so that they cover the handle and "leg" of
the stroller.
6. Standing by the handle, grab the upper part of the backrest (4) and tilt it to the desired position.
7. Grab the black backrest adjustment lever (5) and lift it firmly upwards, tightening it tightly,
thus blocking the backrest – Fig. 1.
8. Unlock the foot brake of the stroller (10) by lifting the horizontal bar at the back of the stroller
with your foot.
FOLDING THE STROLLER:
1. Remove the inter-udder wedge (dowel).
2. Stand in front of the stroller from the footrest.
3. Disassemble the railing (expose the cover, press the metal balls and pull it towards you).
4. Release the backrest adjustment lever (5) by moving it down.
5. Put the backrest on the seat of the stroller.
6. You can but do not have to mount the barrier under the rear back (by pressing two metal balls,
slide it into the ends of the armrests) Attention! Difficult!
7. Move the metal rings (8) up the handle so that it can be folded, lift up the buckle (9) that
protects the stroller from folding.
8. Unlock the footrest support by twisting the plastic knob located close to the front right wheel
a few turns.
9. Place the handle frame (1) towards the footrest.
To Next Page
Loading...