24 / Homeowner’s Guide ComfortNet HiDef Control
If a voltage spike or static discharge blanks out
the display or causes erratic operation of your
control system, you can reset it.
To reset the control system, press
, , and
System button at the same time.
When the control system is reset, the
Control system Settings, time and date, and
programming schedule will be reset to the
factory defaults. Refer to the customized
settings for your control system recorded on
the back cover of this manual. Use this manual
to help restore the desired settings before they
were reset. For your convenience, the factory
default settings are shown.
Reset Operation
Note
To Next Page
Loading...
