Contactless safety sensor,
without polarity, autonomous,
with direct control of dangerous movement
CONTENTS
B10d: Beware of being trapped ____________________________________________________
1. Informations__________________ _________________________________________
1.1 "Reed contact" technology________________________________________
1.2 ACOTOM technology____________________________________________
Associated locking devices for guards : ISO 14119____________________________________
1.ThedierentlockingdevicesaccordingtoISO14119_________________________
2. Comparative technologies________________________________________________
3. The process ACOTOM___________________________________________________
3.1. The birth of a revolutionary technology ______________________________
3.2. Principle of the process ACOTOM3________________________________
3.3.BenetsoftheprocessACOTOM3________________________________
Safety sensors and RFID technology______________________________________________
1. RFID Technology________________________________________________________
1.1. Why?__________________________________________________________
1.2 Disadvantages __________________________________________________
1.3 Our RFID "AXKEF Process" Solution ________________________________
AMX Series : contactless safety switch with redundant duty pilot contacts______________
2.Benets_______________________________________________________________
3. Item code______________________________________________________________
4. Precautions for Use/Assembly ___________________________________________
5. Wide alignment tolerance ________________________________________________
6. Assembly Instructions___________________________________________________
7. Annual Periodic Inspection_______________________________________________
8. PA6 Dimensions________________________________________________________
9. OX Dimensions_________________________________________________________
10. Main Features_________________________________________________________
11. Installation principle with AMX5-MKT for a PLd performance level_____________
12. Installation principle with AMX3-MKT for a PLd performance level_____________
13. Installation principle with AMX3-4-5 for a PLd performance level_______________
13.1. AMX3_________________________________________________________
13.2. AMX4_________________________________________________________
13.3. AMX5_________________________________________________________
14. Preserving contacts____________________________________________________
15. UL508 Compliance_____________________________________________________
Declaration of conformity________________________________________________________
3
3
3
3
4
4
4
5
5
5
5
6
6
6
6
6
7
7
7
7
7
8
8
8
8
8
9
9
10
10
10
10
10
10
11
To Next Page
Loading...
Need help?
General