Comm-Tec DaisyNET-TX - Product Overview and Features; Key Features

Vers. 1.0 Page 6
Figure 1
HDMI Switcher and Extender
(By single CAT-5E/6E AWG 23 cable)
■ Product Overview ( Model Number: DaisyNET-TX/RX )
■ Features
 Use single UTP LAN cable (CAT-5E/6 AWG 23) to substitute HDMI cable to
achieve long distance transmission.
 UTP cable termination follows the standard of IEEE-568B.
 Transmission distance reaches up to 100 meters under the video format of
1080P.
 Auto-adjustment of feedback, equalization and amplify, the user does not need to
care about the length of the cable.
 HDMI V1.4 supported.
 HDCP compliant.
 Full HD support: 1080p@60Hz@48 b/pixels, 3D and 4Kx2K (max. 30 m)
 With LED indicators to show the power status.
 With ESD protection inside.
 Mounting ears supplied.
 Transfer 10M/100M Ethernet with the HDMI signal.
 RS232 Port for firmware update or RS232 control.
 This model could be cascaded.