Comm-Tec DAN-B202 - Device Info; Input Configuration

15
Dante interface 2x2
5.1 Device Info
In this page, it shows the model name, device name, IP address and MAC address.
Dante Lock: Reports the status if Dante device is locked in Dante Controller.
Parameter Lock: If the user clicks it, the parameter of the device can’t be adjusted like
input’s gain or output’s volume.
5.2 Input Configuration
Name: Reports the Dante transmitter channel name for corresponding analog input
and rename the input.
Gain: Allows the user to adjust the input’s gain from 0db to 48db
Channel Status: Reports the number of active Dante receiver devices for Dante
transmitter device.