Comm-Tec DAN-B202 - Output Configuration; Credential Configuration; Config

16
Dante interface 2x2
5.3 Output Configuration
Name: Reports the Dante receiver channel name for corresponding analog output and
rename the output.
Volume: Allows the user to adjust the output’s volume form -60db to 0db.
Assigned RX Channel: Reports the corresponding transmitter channel.
5.4 Credential Configuration
In this page, the user can change the user name and password.
5.5 Config
In this page, it’s supported the model and device name modification, sample rate
(44.1K, 48K and 96KHz) and encoding audio format (PCM 16, PCM 24 and PCM
32) selection.