Dante interface 2x2
1. Product Introduction
The DAN-B202 is a Dante network audio interface allowing users to integrate up to 2
x 2 audio channels of Dante audio into networked AV systems, each input features a
48V phantom power option. The product also supports PoE (IEEE802.3af) power
capability and a small form factor that makes it easy to put Dante connectivity
wherever it's needed and it can be close to the audio source or sink to eliminate the
need for costly and interference-prone analog wiring.
1.1
Features
⚫
2 analog inputs and 2 analog outputs for line / microphone level.
⚫
Supports adjusting the gain per input from 0 ~ +48dB.
⚫
Output volume control from -60dB to 0dB.
⚫
48V phantom power per input channel.
⚫
Powered by PoE (IEEE802.3af).
⚫
Supports 44.1k or 48k audio sample rate.
⚫
Controllable by Dante controller and web-UI.
1.2
Package List
⚫
1x DAN-B202
⚫
2x Mounting ears with 4 screws
⚫
1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
To Next Page
Loading...