Commax CDS-70M - Date and Time; System Information

• Date and time
Able to set the date and time.
1. To set the date and time automatically
☞ Check the automation.
☞ Time server(NTP) and synchronization interval icon are activated.
☞ After pressing time server(NTP), enter the time server. If it is connected with
entered time server well, it is changed to the current time.
☞ Every time set as synchronization interval, it will be synchronized with the time
server.
2. To set the date and time manually
☞ Uncheck the auto.
☞ Date setting and time setting icon are activated.
☞ Press the date set.
☞ If the window of date setting is marked on the screen, after setting the date with +
button and – button, press the confirm button.
☞ If you press the time setting, set time is marked.
☞ On reference to date setting, set up the time.
3. To fix the time zone
☞ Press the time zone
☞ Select the time zone of the city you live currently.
4. To fix the form of 24 hours
☞ Check or cancel the usage of 24 hours form.
5. If checked, it is marked the time as 24 hours. If not checked, 12 hours form is
marked.
6. To fix the date form
☞ Press the select of date form
☞ The window to select the form of date is displayed in a screen.
☞ Press the form to set.
• System Information
Checking the composition installed in a system and product firmware info can be
checked.
1. To check the version of the component
☞ press the component.
☞ The version of the installed composition is marked.
2. To check the firmware info of the product
☞ The version of the boot loader and kernel and built number are displayed.
21