Commax DR-2AG/RF1 - SecuMAX and Door Control Settings; SecuMAX Forced Opening Configuration

 23 
9. Set to be forced opening the Main Entrance
door by SecuMAX
• P - Management password - E - 22 - E - 0 - E : Forwarding to SecuMAX disabled
• P - Management password - E - 22 - E - 1 - E : Forwarding to SecuMAX enabled
• This function is to set the door release by internal sensor information forwarding to
SecuMAX.
① Press Program Button "P"
② Press Management Passwords
③ Press Call Button "E" for call
④ Press number "22" for forwarding to SecuMAX
⑤ Press Call Button "E"
⑥ Select the mode
(0 : Forwarding to SecuMAX disabled)
(1 : Forwarding to SecuMAX enabled)
⑦ Press Call Button "E"
www.safemag.ru
www.safemag.ru