Commax DR-2AG/RF1 - Door Release and Calling Procedures; Building Password Door Release Setup

 42 
26. Setting the door release by building password
① Press Program Button “P”.
② Enter Management Password.
③ Press Call Button “E”.
④ Enter “28” (number twenty-eight).
⑤ Press Call Button “E”.
⑥ Select mode between the numbers “0” and “1”.
(1 : Door release by Building Password enabled)
(0 : Door release by Building Password disabled)
⑦ Press Call Button “E”.
26-1. Setting the Door Release by Building Password
• P – Management Password – E – 28 – 1 – E : Door release by Building Password
enabled.
• P – Management Password – E – 28 – 0 – E : Door release by Building Password
disabled.
• This function enables the door release by Building Password.
• This function provides least security to the access of the entrance since the password is
being shared among number of people. Please keep the security of Building Password
strictly and/or change the Building Password periodically.
www.safemag.ru
www.safemag.ru