Commodore A 2091-40 - Page 41

The A2091 Installation Software Disk 5-5
When formatting is complete, the following message appears:
Hard disk format complet
Would you like the sy
your hard disk?
software to be installed on
The FormatHD program automatically executes InstallHD (described below). You
do not need to double-click on the InstallHD icon.
InstallHD ia
To reinstall the Workbench and Extras files on the hard disk, click on the InstallHD
icon, press [Shift] and double-click on the partition's icon. This program copies
the files from the Workbench and Extras disks onto the hard disk. You will have to
insert the diskettes into the disk drive at the proper time. Be sure to keep unaltered
copies of the Workbench disk and the Extras disk for this purpose.
After double-clicking on the InstallHD icon, you will be prompted:
This will reinstall the system software on hard disk drive
(name).
Files on the hard disk will be overwritten.
Are you sure you want to continue?
Type
Y
for
yes
or
N
for
no
and
press
[Return
.i|.
If
you
type
Y,
watch
the
screen
for requesters
that
ask
you
to
insert
a
disk
into
the
floppy
drive
so
that
the
appropriate
files
can
be
copied
to
the
hard
drive.
Be
sure
to
use
Workbench
1.3
and
Extras
1.3,
The first requester that appears asks you to insert your Workbench 1.3 disk into
any drive. When the disk is inserted, the program will continue. After several minutes,
you will be prompted to insert your Extras 1.3 disk into any drive.
When the system has been properly configured, you will see:
Software installation is now complete.
Remove all floppy disks from the Amiga and reboot the machine. When the
Workbench
screen
appears,
the
Workbench
and
RAM
DISK
icons
should
appear.