Commodore A 2091-40 - Page 70

Technical Specifications
Jumper 1:
Jumper 2:
Jumper 3:
Jumper 5:
Jumper Settings
Memory Size
2 Meg
1 Meg
512K
0 K
Auto: Enables Autoboot ROMs Kickstart 1.3 or higher
Dis: Disables Autoboot ROMs Kickstart 1.2
Factory use only
Option 1: OFF LUN disabled One drive at each address
ON LUN enabled Multiple drives at each address.
Option 2: OFF Time-out disabled Short wait period for drive
Parity checking enabled
ON Time-out enabled Long wait period for drive
Parity checking disabled on message-in phase
Option 4: Reserved for future enhancements
Jumper 201: Factory use only