CommScope DryLine MT Series User Manual

MT Series DryLine
®
Dehydrator User Manual
4
Section 1
General Information
1.1 Introducing New DryLine
®
Dehydrator.
The CommScope DryLine
®
MT1000/2000
Dehydrator are a new generation of
pressurization equipment for antenna and
transmission line systems. They feature a
new patented membrane separation drying
technology for the industry’s best performance
and reliability.
Each large DryLine
®
dehydrator is a
pressurization system built into a convenient
chassis,oor-mountedpackage.Itisaself-
contained unit containing many components
which, in other systems, are typically pieced
together on site.
This Manual contains the information you need
to install, operate and maintain your DryLine
®
MT Series dehydrator.
1.2 Description
DryLine
®
dehydrator provide a source of dry air
-45°C (50°F) dew point or drier, for pressurizing
large antenna and transmission line systems.
Output pressure is controlled nominal 13.79 to
41.37 kPa (2 to 6 psig).
Air pressure is generated by an air compressor
and the air is dried by permeable separation
of the water vapor through a membrane
cartridge, eliminating the use of timer-controlled
heaters, solenoid valves, desiccant towers and
associated wiring, providing greater reliability.
Internal alarm circuitry provides a High Humidity
Power Fail, user setable excess run alarm and a
factory set Low Pressure alarm.
1.3 Introducing the DryLine
®
Dehydrator
StockCheck.com

CommScope DryLine MT Series Specifications

General

Brand	CommScope
Model	DryLine MT Series
Category	Industrial Equipment
Language	English