Need help?Do you have a question about the CommScope DryLine MT Series and is the answer not in the manual?
General| Product Type | Coaxial Cable |
|---|---|
| Manufacturer | CommScope |
| Impedance | 50 Ohm |
| Jacket Color | Black |
| Shielding Type | Corrugated Copper |
| Jacket Material | Polyethylene |
| Available Sizes | 1/2", 7/8", 1-1/4" |
| Operating Temperature Range | -40 °C to +85 °C (-40 °F to +185 °F) |
Introduces the MT Series DryLine® Dehydrator, its features, and core functionality.
Instructions for unboxing, checking for damage, and positioning the unit.
Steps for conducting an initial test of the dehydrator before system connection.
Guides on connecting polyethylene tubing for output and remote sense lines.
Details on wiring alarms and connecting the unit to its power source.
Covers final unit testing and the purging procedure for the dry air cable system.
Explains how to monitor and control air pressure within the system.
Covers alarm programming settings and the correct procedure for shutting down the unit.
Details the internal workings of the dehydrator's drying process.
Explains how the dehydrator's operations are controlled and monitored.
Outlines routine inspections and filter replacement tasks.
Step-by-step guide for replacing the compressor's air filter.
Provides a guide to diagnose and resolve common problems with the dehydrator.
Covers essential steps like unit shutdown, panel removal, and general procedures before part replacement.
Details on replacing the compressor, time delay module, and power switch.
Instructions for replacing water filter, coalescing filter, and heat exchanger components.
Instructions for replacing the cooling fan, alarm board, and pressure switch.
Lists performance parameters, dimensions, power requirements, and connectivity.
Information on troubleshooting, technical assistance, and contacting CommScope.
Details the procedures for warranty/out-of-warranty repairs and shipping instructions.
To Next Page