EasyManua.ls Logo

CommScope WCS-2 User Manual

CommScope WCS-2
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CommScope ERA®
WCS and e-POI Subracks and Power Supply Unit
Installation Guide M0201ABK_uc • June 2021

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the CommScope WCS-2 and is the answer not in the manual?

CommScope WCS-2 Specifications

General IconGeneral
BrandCommScope
ModelWCS-2
CategoryNetwork Hardware
LanguageEnglish

Summary

Document Overview

Document Revision History

Details changes and updates in this manual version for clarity.

Abbreviations and Part Numbers

Lists key terms and CommScope part numbers for system components.

ERA System Overview

ERA System Components Explained

Explains key ERA components like CAN, WIN, TEN, and APs and their roles.

WCS-2 and WCS-4 Subrack Overview

WCS Subrack Back Panel Connectors

Details the rear panel connectors for WCS subracks, including alarm and power interfaces.

WCS Subrack Slot and Card Assignments

Guides on assigning slots and installing cards based on subrack configuration (CAN, WIN, TEN).

Key WCS Subrack Cards

Describes essential WCS subrack cards like SUI, RFD, OPT, CAT, and CDD for system functionality.

WCS Subrack Fan Trays and Filter Modules

Information on fan trays and filter modules for cooling and air filtration within WCS subracks.

Power Supply Unit and Rectifier Modules

PSU Subrack and Rectifier Modules

Overview of the PSU subrack, 12 Vdc, and 57 Vdc rectifier modules for power distribution.

Powering APs with WCS Subrack

Details on calculating maximum APs powered via Cat6A by WCS subrack and CAT card versions.

Optional e-POI Subracks

e-POI Subrack and Interface Card

Overview of the e-POI subrack, its back panel connectors, and the Interface Card (IFC).

e-POI Modules

Describes e-POI modules for RF signal interface and attenuation, including their ports and installation.

Safely Working with ERA Hardware

Safety Precautions and Warnings

Essential safety guidelines for handling ERA hardware, including health and property damage.

ESD Protection and Compliance

Procedures for preventing ESD damage and information on FCC/ISED compliance and RF exposure.

Installation Procedures

Subrack Type Considerations and Preparation

Guidance on WCS subrack types, unpacking, inspecting, and preparing for installation.

Rack-Mounting Subracks and PSU

Instructions for physically installing WCS subracks and PSU in an equipment rack.

Connecting Rear-Panel Cables

Steps for connecting power, communication, and control cables between subracks and PSU.

Installing and Connecting Subrack Cards

Procedures for installing various cards (SUI, RFD, OPT, CAT, AUT, CDD) into WCS subracks.

Maintenance

WCS Subrack Filter Module Maintenance

Guide on cleaning and maintaining WCS subrack filter modules for optimal airflow and performance.

e-POI Module Removal Procedure

Steps to safely remove an e-POI module to prevent false alarms and ensure proper system function.

Cat6A Specifications and Testing Requirements

Details Cat6A cable parameters, performance standards, and testing methods for reliable connections.

Support and Documentation

Contacting CommScope Support

Information on how to contact CommScope for technical assistance and support.

Technical Training and Documentation Access

Resources for technical training and accessing ERA Series user documentation.

Related product manuals