INS_CNFE2MC2C[/M]_REV–
01/18/12 PAGE 2
INSTALLATION AND OPERATION MANUAL CNFE2MC2C[/M]
Tech Support: 1.888.678.9427
Contents
Hardware description 3
Assign IP Address to a Module 5
Using Module as Remote Contact over Ethernet 12
Install ComNet Software Utilities 13
Install the com2com 13
Install the com2tcp 17
Install ComNet Module Configuration software 18
Using the Module through a Virtual COM port (VCP) 20
Manual VCP Configuration 23
Verify VCP Operation 25
Using TeraTerm Telnet Connection 26
Using Windows UPnP to Discover
Your Contact over Ethernet modules 27
To Next Page
Loading...
