Compak F10 Master Conic OD - Page 19

K06315 | v. 19/07/2016 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS
17
Automatically the icon of the desired dose icon and the icon will change to active
color and the four time numbers will then begin to ash.
There are two ways to modify the time:
• Press the icons or on the LCD screen and the time will increase, and press
the icon to decrease the time.
• Also, the time can be changed by using the lower dose button ( ) or the icon
( ) found on the LCD screen ( ). If any of these options are pressed, the grinder
will begin to run and the time, starting at zero, will increase until the chosen
button is released.
10.2. Conguration of the grinder’s main menu
To enter the conguration menú, press the icon. Once in the menu, use the
buttons ( , or ) to toggle through the menu options, and conrm/choose the
desired option with the button. Press the icon to return to the previous
option.
To exit the menú, press the arrow button until the main menu screen is reached, or
simply press nothing for 8 seconds and the menu will reset to the beginning.
Through the conguration menu, it is possible to modify the following grinder
features: