Compak K-5 - Technical Characteristics

Identi cation
3
The following information is printed
indelibly
on the technical
features plate:
NOTE: The manufacturer reserves the right to modify the
components of the machine according to the requirements
of speci c markets or due to the results of technological
advances.
4.1. Scope of application
The coffee grinders are intended for use on commercial premises
and facilities where ground coffee is required, or in small stores
that sell coffee. The grinder must only be used to grind coffee
beans. Any use other than this will be considered improper and
dangerous.
*NOTE: The manufacturer is not responsible for any damage
caused to people, objects or the machine itself that results
from improper use or failure to comply with the safety
guidelines described in this manual.
*Production is based on a medium-roasted coffee and an espresso grind.
MODEL
SERIAL NUMBER
ELECTRICAL DATA
DATE OF MANUFACTURE
OPTIONS
TEL. FAX:
Technical characteristics
4
K-5 K-6 K-6 Silenzio K-8 Silenzio K-10 Conic
MODEL
P in / P out P in / P out P in / P out P in / P out P in / P out
P in / P out P in / P out P in / P out P in / P out P in / P out
P in / P out P in / P out P in / P out P in / P out P in / P out
MODEL P in / P out P in / P out P in / P out P in / P out P in / P outMODEL
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Hopper capacity (lb / gr) 3.74 / 1.700
Hopper capacity (lb / gr) 3.74 / 1.700
Hopper capacity (lb / gr) 3.74 / 1.700
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Height x width x depth 25 x 8.2 x 14.4 in
Height x width x depth 25 x 8.2 x 14.4 in
Height x width x depth 25 x 8.2 x 14.4 in
(in / mm) 635 x 210 x 365 mm
(in / mm) 635 x 210 x 365 mm
(in / mm) 635 x 210 x 365 mm
110 v
60 hz
200w/100w
1100 rpm
200w/100w
1100 rpm
200w/100w
1100 rpm
470w/245w
1540 rpm
470w/245w
1540 rpm
470w/245w
1540 rpm
440w/245w
1300 rpm
440w/245w
1300 rpm
440w/245w
1300 rpm
260w/120w
1400 rpm
260w/120w
1400 rpm
260w/120w
1400 rpm
400w/245w
1390 rpm
400w/245w
1390 rpm
400w/245w
1390 rpm
220 v
60 hz
230 v
50 hz
240 v
50 hz
380 v
50 hz
Ground coffee capacity (lb / gr) 0.66 / 300
Ground coffee capacity (lb / gr) 0.66 / 300
Ground coffee capacity (lb / gr) 0.66 / 300
Lever position Right or left. To choose
Lever position Right or left. To choose
Lever position Right or left. To choose
P in / P out P in / P out P in / P out P in / P out P in / P out
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
P in / P out P in / P out P in / P out P in / P out P in / P out
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
Mill blades (in / mm) 2.4 / 60 2.5 / 64 2.5 / 64 3.3 / 83 2.5 / 63
Production (lb/h Kg/h)* 14.3 / 6.5 24.2 / 11 24.2 / 11 33 / 15 37.4 / 17
280w/150w
1030 rpm
470w/245w
1540 rpm
380w/200w
1300 rpm
245w/140w
870 rpm
420w/250w
920 rpm
680w/370w
265 rpm
760w/370w
270 rpm
730w/450w
340 rpm
730w/450w
340 rpm
490w/300w
340 rpm
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
Net weight (lb / kg) 25.5 / 11.6 31.9 / 14.5 31.9 / 14.5 33.4 / 15.2 37.5 / 17
i
i