Compal PBL0001 - Security Menu and Password Settings

Configures the peripheral devices.
Bluetooth/Wlan/Camera/Card Read/Azalia
Enable or Disable this device, and in the submenu [Azalia <Auto>] you also can select Auto,
Enable or Disable.
VT
Virtualization Technology Enable/Disable.
Configure SATA As
Set Harddisk Controller Configure Type.
POST HotKey Delay
Customizable amount of time for the user to press HotKey at POST.
UMA Share Memory Size
Select DVMT5.0 Pre-Allocated(Fixed) Graphics Memory size used by the Internal Graphics
Device.
Power On Display
Select the Video Device that will be activated during POST
Usb Legacy
USB devices boot and access in DOS. If disable USB Legacy, USB devices can not boot.
FAST Boot
FAST Boot
4.11.4 Security Menu
This menu shows the security setting, such as TPM, User and Supervisor Password,
HDD Password and Power on Password.
InsydeH20 Setup Utility
Main Advanced Security Boot Exit
Supervisor Password : Clear
User Password:
Clear
Set Supervisor Password
Power on Password [Enabled]
Set User Password
HDD Password Status No Accessed
Set HDD Passowrd
Details see the
following
Help Information