OWNERS MANUAL
3
INSTALLATION AND OPERATION OF YOUR FRIDGE/FREEZER
It is important that your appliance is installed and
operated in accordance with the manufacturer’s
instructions to guarantee the performance,
efficiency and operation.
• Position the appliance in a safe and secure
location. Limit exposure to heat sources or direct
sunlight which can affect the unit’s performance
and efficiency.
• The normal operation of the appliance requires
heat to be radiated away from the condenser
located in rear end of the cabinet. Adequate
airflow is required to be available around the
compressor at all times.
• The cooling system has been designed to
operate correctly when the appliance is
positioned on angles up to 35 degrees. It
is recommended that the time the unit is
exposed to angles over 30 degrees is limited
to a maximum of four (4) hours continuous
operation.
• Your appliance can be used as either a freezer
or a refrigerator; it cannot be used as both
simultaneously.
30°
To Next Page
Loading...
