5-14 Removal and Replacement Procedures
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM
Part Number: 177845-001 File name: CH05.doc
When replacing the processor, make sure the white square is in the
upper-right corner
➊. Insert the tip of the screwdriver into the right
socket (marked “SKT CLOSE)
➋ and swing the screwdriver to the right
to seat the processor
➌ (Figure 5-12).
Figure 5-12. Replacing the Processor
To Next Page
Loading...
