Compaq 5000 Series - VII. Checking To See If the Replacement Part Is Installed Properly; 1. Reconnect the power cord to the computer and then to the electrical outlet.; 2. Reconnect all peripheral device cables to the computer.; 3. Turn on the computer using the power button and verify that the replacement part is properly i...

R
EPLACING THE
1394 C
ARD
15
VII. Checking To See If the Replacement Part Is
Installed Properly
1. Reconnect the power cord to the computer and then to the
electrical outlet.
2. Reconnect all peripheral device cables to the computer.
3. Turn on the computer using the power button and verify
that the replacement part is properly installed
(see Figure 7-1).
Figure 7-1
4. If the problem persists, repeat the Removing and
Replacing procedures.
5. If you are still experiencing problems, contact Compaq
Support: 1-800-984-9350
VIII. Returning the Defective Part
Please refer to the Compaq Part Return Instructions that came
with your replacement part for instructions on returning the
defective part.