Compaq 5000 Series - 3. Remove the screw 1 securing the 1394 card, and save it for your replacement card (see Figure 4...; Important: Keep the screw that secured the defective card to the chassis. You will need it for yo...; 4. Pull the 1394 card using a gentle rocking (side-to-side) motion from the PCI slot 2 on the sys...; Figure 4-2

R
EPLACING THE
1394 C
ARD
9
3. Remove the screw 1 securing the 1394 card, and save it
for your replacement card (see Figure 4-2).
Important: Keep the screw that secured the defective card to the
chassis. You will need it for your replacement card.
4. Pull the 1394 card using a gentle rocking (side-to-side)
motion from the PCI slot 2 on the system board
(see Figure 4-2).
Figure 4-2