F-2
Power Cord Set Requirements
Writer: Holly Jahangiri Saved by: ACastle Saved date: 07/24/97 4:37 PM
Pages: 2 Words: 402 Template: c:\template\commercial\commapp.dot
File Name Appf.doc Part Number 308336-001
Country-Specific Requirements
Power Cord Set RequirementsBy Country
Country Accrediting Agency Applicable Note Numbers
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland SETI 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan JIS 3
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-
conductor, 1.0 mm
2
conductor size. Power cord set fittings
(appliance coupler and wall plug) must bear the certification
mark of the agency responsible for evaluation in the country
where it will be used.
2. The flexible cord must be Type SJT or equivalent, No. 18
AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15A, 125V) or NEMA
6-15P (15A 250V) configuration.
3. The appliance coupler, flexible cord, and wall plug must
bear a "T" mark and registration number in accordance
with the Japanese Dentori Law. The flexible cord must be
Type VCT or VCTF, 3-conductor, 0.75 mm
2
conductor
size. The wall plug must be a two-pole grounding type
with a Japanese Industrial Standard C8303 (15A, 125V)
configuration.
To Next Page
Loading...
