3-2
Using Network Communications
Writer: Your Name Saved by: Troy Witte Saved date: 07/24/97 4:42 PM
Pages: 6 Words: 1022 Template: c:\template\commercial\comm.dot
File Name Ch3.doc Part Number 308336-001
✎
100 Base-TX operation requires the use of Category 5
UTP cable with an RJ-45 network connection.
The controller also features Remote Wakeup, which allows the
system administrator to power on a client computer from a
remote location, through the use of supported PC LAN
management tools.
✎
Remote Wakeup support is available only when using an
RJ-45 network connection.
For more information on Remote Wakeup, refer to the
Power Management section of Chapter 2, “Using
Intelligent Manageability,” or to the online Remote
Management Guide.
To Next Page
Loading...
