Compaq Deskpro EX - Chassis Fan

Compaq Deskpro EX Series of Personal Computers 4-29
4.15 Chassis Fan
1. Prepare the computer for disassembly (Section 4.2).
2. Remove the computer cover (Section 4.3).
3. Disconnect the fan power cable from the system board 1.
4. Remove the four screws that connect the fan to the back of the chassis 2.
5. Lift the fan out of the chassis 3.
✎
Make sure the fan is installed so that it blows air out of the computer.
To replace the chassis fan, reverse the above procedure.