3–2 Software Guide
Security
Setting Preferences in Computer Setup
Most security preferences are set in Computer Setup. Because
Computer Setup is a non-Windows utility, keystrokes (not
notebook pointing devices) are used to navigate or select within
the utility.
If you are unfamiliar with non-Windows utilities, Compaq
recommends that you read “Using Computer Setup” in the
“Setup and Diagnostics Utilities” section of this guide before
using the utility to set a security preference.
✎
An external keyboard connected by USB can be used in
Computer Setup only if USB legacy support is enabled. For more
information about USB, refer on this CD to the Hardware Guide,
“External Device Connections” section.
Using Passwords
Forgetting Passwords
Most security features use passwords. Whenever you set a
password, write down the password and store it in a secure
location away from the notebook.
■
If you forget your power-on or Compaq administrator
password, you cannot start up the notebook or exit
Hibernation until a Compaq authorized service provider
resets the notebook. To contact a Compaq authorized service
provider, refer to the Worldwide Telephone Numbers booklet
included with the notebook.
■
If you forget both your user and master DriveLock
passwords, the hard drive is permanently unusable.
■
If you forget your DriveLock user password but know your
DriveLock master password, you can remove DriveLock
protection from the drive. For instructions, refer to “Using
DriveLock” in this section.
To Next Page
Loading...
