3–12 Software Guide
Security
Disabling a Device
From the Computer Setup Device Security menu, you can disable
or partially disable most ports and drives. For more information
about the option to disable the MultiPort
Fn+F2
hotkeys, refer on
this CD to the Hardware Guide, “Pointing Devices and
Keyboard” section.
1. To open Computer Setup, turn on or restart the notebook.
Press
F10
while the F10 = ROM Based Setup message is
displayed in the lower left of the screen.
❏
To change the language, press
F2.
❏
For navigation instructions, press
F1.
2. Select the Security menu > Device Security, then enter your
preferences.
❏
Settings for a DVD-ROM can be entered in the CD-ROM
field.
❏
Diskette drive settings do not apply to SuperDisk or
Zip drives.
3. To confirm your preferences, press
F10.
4. To save your preferences, select File > Save Changes and
Exit, then follow the instructions on the screen.
Your preferences are set as you exit Computer Setup and are
in effect when the notebook restarts.
To Next Page
Loading...
