Security
Software Guide 3–13
Protecting System Information
Selecting an Information Management Procedure
To do the following tasks, follow the procedure for “Entering and
Displaying System Information” next in this section.
■
Display or enter the notebook serial number, asset tag, and
ownership tag.
■
Display or enter a battery pack serial number.
■
Display or enter a port replicator serial number and asset tag.
■
Display the processor serial number.
■
Enable or disable the ability of the processor to report the
processor number to software.
■
Specify how the notebook is to recognize multiple, identical
port replicators.
To deny access to the above information by another user, use a
Compaq administrator password. For instructions, refer to “Using
a Compaq Administrator Password” earlier in this section.
To display, print, or save configuration or diagnostic information
about all system components, including components that are not
listed above, use the Compaq Diagnostics utility. For instructions,
refer in this guide to the “Setup and Diagnostics Utilities”
section, “Using Compaq Diagnostics.”
To Next Page
Loading...
