Compaq N800v - Evo Notebook - Pentium 4-M 1.7 GHz - Audio and Video Device Connections

Setup and Diagnostic Utilities
Software Guide 7–7
Selecting from the Advanced Menu,
continued
Select To Do This
Device Options
(continued)
■
Enable/disable USB legacy support
for a USB keyboard, mouse, and
hubs. When USB legacy support is
enabled:
❖
A USB keyboard, mouse, and
hubs work even when a Windows
operating system is not loaded.
❖
The notebook can start from a
bootable hard drive, diskette
drive diskette, SuperDisk drive
disk, or CD-ROM, CD-RW, or
DVD inserted into a drive
connected by USB to the
notebook or an optional port
replicator.
■
Enable/disable all settings in the
SpeedStep window. (When Disable is
selected, the notebook runs in
Battery Optimized mode.)
■
Specify how the notebook recognizes
multiple identical port replicators that
are identically equipped. (Select
Disable to recognize the port
replicators as a single port replicator;
select Enable to recognize the port
replicators individually, by serial
number.)
■
Enable/disable the reporting of the
processor serial number by the
processor to the software.
■
Enable/disable inclusion of an internal
peripheral interconnect (PCI) Network
Interface Card (NIC) in MultiBoot.