Compaq Presario 5700 Series - Page 154

ba2.jpg (80756 bytes)
If the power-on password is not known, clearing
CMOS will disable the power-on password. To
clear CMOS, complete the following steps:
1.
Complete the preparation for disassembly.
2. Remove the Chassis.
3. To disable the password, move the jumper
at JP1 from 1-2 to 2-3.
4. Wait for ten seconds.
5. Move the jumper at JP1 from 2-3 to 1-2.
6. Replace the chassis and perform the desired
troubleshooting.
privacy and legal statement
Compaq.com - Compaq Presario Maintenance and Service Guide - 5700 Series
http://www.compaq.com/athome/support/msgs/5700/clearngCEL.html (2 of 2) [1/10/2002 11:56:01 AM]