Compaq Presario 5700 Series - Chassis

United States
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Maintenance & Service Guide
Presario 5700 Series Personal Computers
Models: 5710, 5711, 5712, 5714, 5715, 5716, 5717, 5718, 5721,
5722, 5724, 5726, 5728, 5733, 5735, 5736, 5738, 5745 and 5746
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts |
Removal & Replacement | Jumpers & Switches | Specifications | Connector Pins
Removal and Replacement
Chassis
Disassembly
Sequence
Chassis
Mass Storage Devices
Button Board
Front I/O Cable
Creativity Action Center
Fan
Option Card Retainer
Graphics Board
Fax/Modem
Networking Interface Card
Memory
Processor
Processor Retention Clips
RTC Battery
System Board Cables
System Board
Parallel Port
Removal
1
Perform the preparation for
disassembly procedures.
2 Remove five screws from the back of
the computer.
3 Grasp the handle on back of the
computer chassis, and pull back to
separate from cover.
Replacement
To replace the chassis, reverse the
removal procedure.
Back to Removal and Replacement
Compaq.com - Compaq Presario Maintenance and Service Guide - 5700 Series
http://www.compaq.com/athome/support/msgs/5700/remhood.html (1 of 2) [1/10/2002 11:55:41 AM]