Compaq Presario 5700 Series - Page 109

United States
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Maintenance & Service Guide
Presario 5700 Series Personal Computers
Models: 5710, 5711, 5712, 5714, 5715, 5716, 5717, 5718, 5721,
5722, 5724, 5726, 5728, 5733, 5735, 5736, 5738, 5745 and 5746
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts |
Removal & Replacement | Jumpers & Switches | Specifications | Connector Pins
Removal and Replacement
Parallel Port
(For non-AMD models only)
Disassembly
Sequence
Chassis
Mass Storage Devices
Button Board
Front I/O Cable
Creativity Action Center
Fan
Option Card Retainer
Graphics Board
Fax/Modem
Networking Interface Card
Removal
1.
Perform the preparation for disassembly
procedures.
2.
Remove the Chassis.
3. Disconnect the parallel cable from
connector on the system board.
4. Remove the screwlocks that secure the
Parallel Port to the chassis and pull the
Parallel Port out of the chassis.
Replacement
To replace the Parallel Port, reverse the
removal procedure.
Compaq.com - Compaq Presario Maintenance and Service Guide - 5700 Series
http://www.compaq.com/athome/support/msgs/5700/srlprt.html (1 of 2) [1/10/2002 11:55:52 AM]