Compaq Presario 5700 Series - Page 84

United States
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Maintenance & Service Guide
Presario 5700 Series Personal Computers
Models: 5710, 5711, 5712, 5714, 5715, 5716, 5717, 5718, 5721,
5722, 5724, 5726, 5728, 5733, 5735, 5736, 5738, 5745 and 5746
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts |
Removal & Replacement | Jumpers & Switches | Specifications | Connector Pins
Removal and Replacement
Digital Creativity Imaging Center
Disassembly Sequence
Chassis
Mass Storage Devices
Button Board
Front I/O Cable
Digital Creativity Imaging Center
Fan
Option Card Retainer
Graphics Board
Fax/Modem
Networking Interface Card
Memory
Processor
Processor Retention Clips
Removal
4. Remove EMI gasket (not shown) from
the front of DCIC port.
5. Remove the screw holding the DCIC port
to the chassis.
6. Slide port to the left, then push in to
remove from chassis.
Replacement
To replace the Digital Creativity Imaging
Center, reverse the removal procedure.
Compaq.com - Compaq Presario Maintenance and Service Guide - 5700 Series
http://www.compaq.com/athome/support/msgs/5700/creatctr1.html (1 of 2) [1/10/2002 11:55:44 AM]