5–2 Mobile Internet PC User’s Guide
Presario 700 Series
Using the CD or DVD Drive
CD or DVD Drive
In this section, you will learn how to insert and remove CDs and
DVDs. This section covers:
■
Inserting a Disc
■
Removing a Disc
■
Manually Ejecting a Disc
Inserting a Disc
To load a disc into the disc drive, complete the following steps:
Ä
CAUTION: Improper handling of a CD or DVD can damage the disc
and could potentially damage the drive.
1. Press the Eject button located on the front of the drive.
2. Remove a disc from its protective case, holding the disc by its
center hole and outer edge to avoid touching the surface.
3. Place the disc, label side up (unless it is a double-sided
DVD), into the round area of the tray. Gently press the disc
down onto the center spindle of the tray until the disc snaps
into place.
cad goes here
To Next Page
Loading...
