Compaq UPS R3000 XR User Manual

Chapter
3
Removal and Replacement Procedures
This chapter provides guidance for removing and replacing spare parts in the Compaq UPS
R3000 XR.
Before You Begin
WARNING:
The Compaq UPS R3000 XR is a high-energy product. There is a risk of personal
injury from electrical shock and hazardous energy levels. Persons performing installation or
service procedures must be Trained Service Technicians, knowledgeable about the procedures,
precautions, and hazards associated with high-energy AC Power Products.
Before beginning any of the procedures in this chapter, read and understand the cautions and
warnings in Chapter 1, “Before You Begin.”
Replaceable Parts
The UPS R3000 XR contains the following replaceable parts:
!
Front bezel
!
UPS battery pack
!
Electronics module
!
Option or communication board
!
UPS unit
!
ERM battery packs
!
Extended Runtime Modules (ERMs)

Compaq UPS R3000 XR Specifications

General

Power Capacity	3000 VA / 2700 W
Rack Size	2U
Battery Type	Sealed Lead-Acid (SLA)
Frequency	50/60 Hz
Battery Recharge Time	3 hours to 90%
Operating Temperature	0°C to 40°C
Storage Temperature	-15°C to 45°C
Humidity	0-95% non-condensing
Communication Ports	RS-232, USB
Input Voltage	200-240 VAC
Output Voltage	200-240 VAC
Interface	RS-232, USB
Transfer Time	4 ms typical
Dimensions	85 x 440 x 660 mm
Form Factor	Rack/Tower Convertible