Set Hard disk Controller Configure Type.
USB Legacy
USB devices boot and access in DOS.
4.11.4 Security Menu
This menu shows the security setting, such as TPM, User and Supervisor Password,
HDD Password and Power on Password.
InsydeH20 Setup Utility
Main Advanced Security Boot Exit
Supervisor Password : Clear
Details see the
following
Help Information
Set Supervisor Password
Power on Password [Disabled]
Secure Boot Status [Disabled]
Secure Boot [Disabled]
Erase all Secure Boot Settings [Disabled]
Restore Secure Boot to Factory
Default
[Disabled]
F1 Help ↑↓Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← → Select Menu
Enter Select 4SubMenu
F10 Save and Exit
Supervisor Password
Show the Password status: Clear or Set
Set Supervisor Password
Install or Change the password.
Power on Password
Enable or disable the Power on Password. You only can enable/disable Power on password
after the Supervisor password is set.
To Next Page
Loading...