10
Setting the Date and Time
Using the MENU UP/DOWN buttons, cycle through the MONTH, DAY, YEAR, HOURS,
and MINUTES display screens using the SET UP/DOWN buttons to set the date and
time. To synchronize to the nearest second, set the “MINUTES” value and at the mark,
advance to the next/previous display screen. Internally, the timer will be set to 0
seconds at the instant you change to a dierent menu screen. Be sure to note the AM/
PM setting on the hours screen. The timer will usually retain time and date settings
when changing batteries if the change is done as quickly as possible. However, if the
battery is removed and not replaced immediately, time/date information is lost and
must be reset.
To Next Page
Loading...