Competition Electronics Pocket Pro II - Shot Dead Time Configuration; Shot Sensitivity Configuration

To Next Page

To Previous Page

User Manual / Operating Instructions

Shot Dead Time

The SHOT DEAD TIME feature is used to reduce false shot recordings due to echoes

or ringing . Once a shot is detected, the Pocket Pro II will disregard subsequent shots

for a short period of time. The default setting is .11 seconds, but can be adjusted from

.05 to .12 seconds. If your split time between shots is less than .11 seconds, an adjust-

ment will be necessary. Navigate to the SHOT DEAD TIME display using the MENU

UP/DOWN buttons and adjust as needed. The shot dead time setting is set to a xed

value of .032 seconds when in the RPM mode.

Shot Sensitivity

Shot sensitivity is variable between 0 and 25 and is settable from the SHOT SENSITIV-

ITY screen. Use the SET UP/DOWN buttons to adjust the value. Increase the value for

greater sensitivity; decrease it for less sensitivity. Keep in mind that higher sensitivity

settings will also increase the chance of false shot detection from handling, vibration,

or other noise sources.