Clean and degrease the skin with an alcohol swab or cotton ball with alcohol and
then dry it before applying the pads. For hygiene purposes, do not share your pads
with others.
When removing your pads from your skin, peel from the side of the pad. Do not pull
the pad off by the wire. When you store your electrode pads after your session, make
sure to stick them on the transparent plastic film provided. Always adhere the pad
to the "on" side of the film. Place the film with the pads back inside the plastic bag,
squeeze the excess air out of the bag, and then completely seal it for storage.
ELECTRODE POSITIONS AND TIPS CONT.
DEVICE SET UP
CONNECTING THE CABLES TO THE STIMULATOR
The stimulator cables plug into the 4 sockets on the front of the device.
Four cables can be connected simultaneously to the 4 channels of the device. Both
the sockets and the cables are color-coded to simplify use and facilitate identification
of the different channels.
DEVICE SET UP
To Next Page
Loading...
Need help?
General
