SPECIFICATIONS
UNIT CHARACTERISTICS
Body: plastic
Weight: 350 g, 12.25 ounces
Length: 142 mm, 5.6 inches
Width: 99 mm, 3.9 inches
Height: 36 mm, 1.4 inches
POWER SUPPLY
NIMH rechargeable battery (4.8 V ³ 1’500 mAh)- P/N 941210
OUTPUT SPECIFICATIONS
Pulse shape: Constant rectangular current with pulse compensation to eliminate any
direct current component to prevent residual polarization at skin level.
Maximum pulse intensity: 120 mA
Pulse intensity increments: manual adjustment of stimulation intensity from
0 to 999 (energy) in minimum increments of 0.5 mA.
Pulse width: 200 to 400 s
Maximum electrical charge per pulse: 96 microcoulombs (2x48 C, compensated).
Standard pulse ramp-up time: 3 s (20%-80% of maximum current).
Pulse frequency: 1 to 120 Hz
Protection Rating: IPX0
DESCRIPTION OF ACCESSORIES
Battery charger for recharging the battery (P/N 683026):
Type TR503-02-A-133A03; Input 100-240 VAC/ 50 to 60Hz/0.2A max.; Output 9V/400~ 750mA
Four black snap-connection stimulation cables (P/N 601131):
Device connector: 6-pin; Electrode connector: female snap; Length: 1500 mm
Self-adhesive electrodes:
4 small electrodes (P/N 11-9119) (5 x 5 cm, 2 x 2 inch)
4 large electrodes (P/N 11-9120) (5 x 10 cm, 2 x 4 inch)
Electrodes are Latex Free
OUTPUT WAVEFORM
Biphasic rectangular impulse with electrical mean equal zero (net zero DC).
All electrical specifications are given for an impedance of 500-1000 ohms per channel.
Channels: Four independent and individually adjustable channels that are electrically
isolated from each other and earthed.
To Next Page
Loading...
Need help?
General
