The Compex Edge is intended for use in the electromagnetic environment
specified below. The customer or the user of the Compex Edge should assure
that it is used in such an environment.
Emission Tests Compliance
Electromagnetic Environment
Guidance
CISPR 11
RF Emissions
Group 1
The Compex Edge uses RF energy
only for its internal operation.
Consequently, its RF emissions are
very low and are unlikely to interfere
with any adjacent electrical device.
CISPR 11
RF Emissions
Class B
The Compex Edge is suitable for
use in any establishment, including
a private dwelling and a place
connected directly to the low
voltage mains supply which powers
residential buildings.
Harmonic
Emissions
IEC 61000-3-2
Not
Applicable
Voltage
Fluctuations/
Emission
Oscillations
IEC 61000-3-3
Not
Applicable
TABLE 1: RECOMMENDATIONS AND DECLARATION
BY THE MANUFACTURER CONCERNING
ELECTROMAGNETIC EMISSIONS
ELECTROMAGNETIC COMPATIBILITY
To Next Page
Loading...
Need help?
General
