DEVICE OPERATION
PRELIMINARY SETTINGS
Before using the unit for the first time, you should select the working language of
the device which is displayed on the options screen. Follow the instructions below.
Afterwards, for the greatest comfort, the Compex Edge offers you a number of
setting options (operating language selection, display contrast setting, adjusting
backlighting and volume setting). To change any of these settings, bring up the
options screen by holding the On/Off button on the left of the stimulator for a few
seconds when the device is Off.
A
B
C D E
A Press the On/Off button to validate the selected parameters. The stimulator
saves the options. It is now ready for use with the settings you selected.
B Use the Channel 1 +/– button to choose the language you wish to use.
C Use the Channel 2 +/- button to adjust the contrast of the screen.
D Use the Channel 3 +/- button to adjust the volume.
E Use the Channel 4 +/- button to adjust the backlighting.
• On: Backlighting always on.
• Off: Backlighting always off.
• Auto: Backlighting activated whenever a button is pressed.
To Next Page
Loading...
Need help?
General
