CompuLab fitlet2 - Page 8

Hayetsira St. 17, Yokneam, Israel
Tel: +972-48-290-168 | Fax: +972-48-325-251 | www.fit-iot.com
www.fit-iot.com
Page 8 of 17
fitlet2 owner’s manual
To open fitlet2 please follow these steps:
1. Place fitlet2 on a flat surface bottom-up.
2. Open the four screws using the Phillips screwdriver (counter clock-wise).
3. Lift the bottom cover to remove it. Side panels should fall-off.
4. Lift fitlet2 from the top cover.