1-2
Specifications
Microprocessor P80C51RD2
Memory 25C320
Voice Synthesizer Texas Instruments MSP53C391NI2D
Voice Vocabulary 335 Words
DTMF Receiver MT8870
Operating Temperature -15 to +55 degrees C
Call Letter ID Buffer size VOICE (15) - CW (16)
User Function Outputs (4) Switch 40VDC @ 50mA.
Logic Inputs (4) 10K ohm input impedance
Low (0 to 0.8VDC) High (2.4 to 15VDC)
Logic Outputs Open Collector Relay Driver (28VDC at 50mA)
Audio Input Receiver 0.2 - 2VAC adjustable 10K ohms
Audio Output Transmitter 2VAC adjustable 600 ohms
Power +9 to +15VDC at 70mA
Size 4.5" X 5.0"
Warranty Limited one year, parts and labor.
FCC Part 15 RF Interference
When installed in the RME-200 rack mount enclosure, the CAT-200B has been tested and found to meet
the standards for a Class A digital device, as specified in Part 15 of the FCC Rules. These specifications
are designed to provide reasonable protection against such interference in a commercial installation.
However, there is no guarantee that interference will not occur in a particular installation.
To Next Page
Loading...
Need help?
General