Area 6: Authentication accounts of managed cameras
Only successfully authenticated cameras can be used normally. Before adding a camera,
add the authentication account and password of the camera to the list.
To log in to an IP camera, you need to enter the correct authentication account. Only
successfully authenticated IP cameras can be managed.
!
The system provides the default account admin and default password admin. You
can click
to add an IP camera authentication account.
!
To delete an IP camera authentication account, select the account and click .
Area 7: IP camera setup
You can view the status of an IP camera and set the name, IP address, recording policy,
stream parameter, and motion detection parameter of the IP camera.
!
View the status of an IP camera
The camera status may be Online, Offline, or required authentication. For an online
IP camera, click
to view live video preview.
!
Changing the name of an IP camera
Enter a name in the Name column using the on screen keyboard.
!
Setting a recording policy
Click the recording policy to be modified. The Recording Policy Configuration
dialog box is displayed.
!
Setting a stream
Click the stream to be modified. The Stream dialog box is displayed, as shown in
Figure 5-6.
To Next Page
Loading...
